Mishimoto AN Hose & PTFE Line

Mishimoto’s braided hose is listed in -6AN and -10AN, either as bulk hose or made up into finished lines. Bulk hose comes in lengths from 3 to 15 feet, with a stainless steel braid or a black nylon outer. Made-up lines are -10AN, from 3 to 6 feet long, in stainless or black. The fittings come already attached: straight at both ends, or straight at one end and 90 degrees at the other.

The rest are vehicle-specific oil line kits, whose titles name the model they are made for, and universal oil line stays in black or gold. The stays hold -10AN lines in place and stop them rubbing against each other.

Bulk hose makes sense when you are routing lines to your own layout, for example to a remote oil cooler or filter. You then need matching braided-line fittings, which are in Mishimoto’s AN adapter listings. A made-up line saves assembly time where a standard length will reach.

Measure the route with a length of wire or string before ordering, leaving slack for engine movement, and keep braided hose away from sharp edges and exhaust heat.