Engine Management

Wiring Harnesses

Wiring Harnesses categories

Top brands in Wiring Harnesses

Wiring Harnesses guide

An engine management harness carries power, sensor signals and output drives between the ECU and the engine, and the reliability of the whole system rests on it. Wiring Harnesses gathers the harnesses on three pages, by how much of the car’s wiring they replace.

  • Plug-and-Play Harnesses: adapter harnesses that sit between a new ECU and the car’s factory loom, so the original wiring, sensors and plugs stay. They are listed by car, and conversion harnesses for engine swaps are found here too.
  • Engine-Specific Harnesses: complete terminated looms for one engine family, with the engine’s plugs already fitted, and the injector, ignition, throttle and sensor sub-harnesses that finish them.
  • Universal Harnesses: wire-in harnesses with flying leads for any car, expansion and auxiliary harnesses, looms for modules and amplifiers, and sensor adaptor harnesses and cables.

Choose by the state of the car. Where a plug-and-play harness exists for your model and the factory loom is sound, it is the quickest route and can be undone. Where the engine has been swapped or rebuilt, an engine-specific harness gives a ready-made loom for it. Where neither fits, a universal harness is wired to the car lead by lead.

Every harness plugs into one ECU family, so start from the unit you have. Use the filters on this page, Suits ECU and Engine, to narrow the list, or open the page that matches your route.

Many faults on a standalone installation trace back to wiring rather than the ECU: a loose pin, a shared ground or a trigger wire run beside a coil lead. Route any harness clear of exhaust heat, moving parts and sharp edges, keep crank, cam and knock wiring apart from coil and injector feeds, and check every pin against the pinout before the ECU is connected.