
Top brands in Vacuum & Boost Fittings
Vacuum & Boost Fittings guide
Boost and vacuum signals reach the wastegate, blow-off valve, boost controller, gauges and fuel pressure regulator through small reference lines, and these fittings make the connections. This category holds boost reference adaptors made for particular cars, modular vacuum and sensor blocks, threaded port fittings and adapters, hose tails with blanking plugs, push-to-connect fittings for nylon tubing, and a kit of vacuum hose, a T-fitting and clamps.
A clean signal starts at the right source. Most devices need manifold pressure taken after the throttle, while a boost controller usually takes pressure from the compressor side. A boost reference adaptor fits between the factory manifold pressure sensor and the intake, so the sensor keeps its full signal while extra ports feed a gauge or valve. A distribution block takes one reference and shares it among several devices, which keeps the engine bay tidy and avoids a chain of tees.
Choose by the job:
- Boost reference adaptors: each is made for the car or engine in the title.
- Blocks: distribution, sensor, vacuum and combination blocks join together into one manifold, with end caps to close it.
- Port fittings: threaded adapters between the small tapered ports on valves and blocks and AN flare fittings or other threads.
- Hose tails and blanks: for running plain vacuum hose from a wastegate port, and for closing the ports you do not use.
- Push-to-connect fittings: straight, elbow and tee fittings for nylon tubing, made for the reference lines of external wastegates.
- Hose kit: vacuum hose with a T-fitting and clamps, enough to plumb most boost controllers.
Seal tapered threads with a sealant that cannot reach the port, as a fragment in a small reference passage can block it. Keep reference lines short and secure, and route them away from heat. Check every joint for leaks after fitting: a leak in a wastegate line lets boost climb, and a leak after the throttle upsets the idle. Vacuum hose by the metre and nylon tubing are listed under Silicone Hoses › Vacuum Hose, and boost controllers under Boost Controllers.





























