
Top brands in Turbo Gaskets
Popular cars in Turbo Gaskets
- Subaru Impreza GDTurbo Gaskets for the Subaru Impreza GD: 6 products
- Subaru Impreza GHTurbo Gaskets for the Subaru Impreza GH: 5 products
- Subaru Legacy BLTurbo Gaskets for the Subaru Legacy BL: 5 products
- Subaru Legacy BPTurbo Gaskets for the Subaru Legacy BP: 5 products
- Nissan Silvia S14Turbo Gaskets for the Nissan Silvia S14: 2 products
- Nissan Silvia S13Turbo Gaskets for the Nissan Silvia S13: 2 products
- Toyota MR2 W20Turbo Gaskets for the Toyota MR2 W20: 2 products
- Subaru Impreza GCTurbo Gaskets for the Subaru Impreza GC: 1 product
Turbo Gaskets guide
Every joint around a turbo has to seal against heat, pressure and constant thermal movement. This category holds complete turbo gasket sets for particular engines, and single gaskets for the turbine inlet and outlet, the oil feed and return, and external wastegates.
The turbine inlet flange is the hardest joint to seal. It glows under load, grows and shrinks with every heat cycle, and takes the full pulse of each exhaust stroke. A leak there wastes energy the turbine needs, slows spool, often ticks audibly and can scorch wiring or hoses nearby. Stainless steel gaskets keep their shape at temperatures that burn out soft ones, and divided gaskets keep the two scrolls of a twin-scroll housing apart.
The range falls into these groups:
- Turbo gasket sets: the gaskets and seals needed to remove and refit a turbo, packed together for one engine and listed by make, capacity, valve count and engine code. Some engines have more than one set, for different versions, so confirm the code on the engine itself.
- Turbine inlet gaskets: for the common bolted flange standards, open or divided for twin-scroll housings, mostly in stainless steel, and for particular turbine housings.
- Outlet and oil gaskets: turbine outlet gaskets, and gaskets for the oil feed and return flanges, listed by turbo series or flange.
- Wastegate gaskets: for mounting an external wastegate on its flange.
- Gaskets for particular cars: some gaskets are listed for one make, such as the turbo inlet and outlet gaskets for Subaru engines.
Use the filters on this page to choose the gasket position. Before fitting a gasket, check both flange faces for flatness, as manifolds can warp after many heat cycles, and skim or replace a warped one. Fit a new gasket every time a joint is opened, without sealant unless the maker calls for it. Use high-temperature studs and nuts with anti-seize, tighten them evenly in steps, and recheck after the first heat cycles where the maker advises it. Weld flanges and flange kits are listed under Turbo Flanges & Clamps, and wastegate valve seats under Wastegates › Wastegate Replacement Parts & Accessories.






















































