
ECUs · Harnesses · Sensors · Dashes
Engine Management
Standalone ECUs, plug-and-play harnesses, expanders, sensors, CAN devices and dashes. From Haltech, Innovate Motorsports and RMT Racing, with the plugs and pins to wire them.
- 634 products
- 11 subcategories
- 5 brands
- Ships from EU stock
- Engine Management guide
Engine Management categories
Top brands in Engine Management
Popular cars in Engine Management
- Subaru Impreza GDEngine Management for the Subaru Impreza GD: 20 products
- Nissan Silvia S14Engine Management for the Nissan Silvia S14: 15 products
- Nissan Skyline R32Engine Management for the Nissan Skyline R32: 11 products
- Nissan Skyline R34Engine Management for the Nissan Skyline R34: 11 products
- Subaru Impreza GHEngine Management for the Subaru Impreza GH: 10 products
- Honda S2000 APEngine Management for the Honda S2000 AP: 7 products
- Nissan Fairlady Z32Engine Management for the Nissan Fairlady Z32: 4 products
- Honda Civic EKEngine Management for the Honda Civic EK: 3 products
Engine Management guide
Engine management means the electronics that run the engine: the ECU that controls fuel and ignition, and the sensors, wiring and modules around it. This section covers standalone ECUs, wiring harnesses on three pages (plug-and-play, engine-specific and universal), engine sensors and the fittings and mounts that hold them, wideband controllers, electronic throttle bodies, CAN devices and cables, modules and expanders, dashes and displays, plugs and pins, and the cables, mounts and tools in Engine Management Accessories.
A standalone ECU replaces or works alongside the factory unit when the engine has changed too much for the original calibration, for example after a larger turbo, different injectors or an engine swap. Choose the ECU by the number of cylinders, injectors and ignition outputs you need, then by the extra inputs and outputs for boost control, drive-by-wire throttle, flex fuel or data logging. Harnesses and adapters say which ECU they connect to: where a plug-and-play harness exists for your car it keeps the factory wiring, an engine-specific harness gives a ready loom for a swapped engine, and a universal harness is wired to the car lead by lead.
Use the filters on this page to narrow the whole section, for example by Suits ECU, Supplied with, Sensor type, Fitting type or Engine, or open the page for the kind of part you need.
Plan the whole installation. Sensors must suit the new calibration, and connectors are available as plugs and pins for making or repairing looms. A CAN link can feed a dash or data logger without extra wiring. Give the ECU a clean power feed through its own fuse and relay, and check that the coils and injectors are compatible with it.
An ECU is only as good as its calibration, so plan for a tuner’s time on a dyno or road as part of the project. Gauges and data loggers are listed under Gauges & Sensors, and igniters under Electrical › Ignition Modules.




















































