Engine Management

Sensor Fittings & Mounts

Top brands in Sensor Fittings & Mounts

Sensor Fittings & Mounts guide

A sensor reads correctly only when it sits in the right place, held firmly and sealed. This page holds the parts that mount sensors: aluminium weld fittings for temperature sensors, thread adaptors, weld-on bases, compression fittings and a band clamp for exhaust temperature probes, split-collar mounts and a weld-on tab for suspension travel sensors, magnet collars and magnets for driveshaft speed sensing, flex fuel line fittings, a pressure sensor extension kit and a coolant sensor adapter for engine swaps.

Many fittings exist because the sensor and the part it reads from were never made for each other. A weld fitting adds a threaded boss to an intake pipe or coolant line that has no port. A thread adaptor joins a sensor to a port of another thread, and an extension kit moves a sensitive pressure sensor away from engine vibration onto a hose.

How to choose:

  • Type: use the Fitting type filter on this page to narrow the list to weld fittings, thread adaptors, compression fittings, sensor mounts, trigger collars and the rest.
  • Thread: match the fitting to the thread of the sensor and of the port, both named in the title.
  • Material: weld a fitting only to the same metal, aluminium to aluminium and steel to steel, and choose stainless steel bases for stainless manifolds.
  • Size: collars and mounts are listed for the tube or shaft they clamp, so measure it first.

Weld a fitting before the pipe is coated or fitted to the car, and clean the thread afterwards. Seal tapered threads with a sealant suited to the fluid, keeping it off the first thread so none enters the system. Check a magnet collar’s position against the speed sensor after tightening, and keep the gap the sensor maker gives.