Gauges & Sensors

Air/Fuel Ratio Gauges

Top brands in Air/Fuel Ratio Gauges

Air/Fuel Ratio Gauges guide

An air/fuel ratio gauge shows the mixture the engine is burning, read by a wideband oxygen sensor in the exhaust. This page holds Innovate’s wideband gauges: complete kits with the sensor and its controller, gauges alone for a controller you already have, a dual gauge kit that reads two sensors, and combined gauges that show the mixture beside boost or nitrous pressure and can act on it.

The mixture is the most direct check on fuelling. Too lean under load and combustion temperatures rise towards detonation; too rich and power falls and the plugs foul. A gauge lets the driver see a change as it happens, such as a failing pump or a blocked injector, and lets a tuner check the map on the road. Readings are shown as an air/fuel ratio or as lambda, where the ideal mixture reads one.

How to choose:

  • Kit or gauge alone: a complete kit needs only fitting; a gauge alone needs a controller and sensor already on the car.
  • Display: needle, digital and LED displays are listed. Pick one that can be read at a glance in your cockpit.
  • Combined gauges: some gauges add boost or nitrous pressure and a safety output that acts when the mixture leaves its limit.
  • Output: most kits also send the reading to an ECU or a data logger, which saves a second sensor.

Fit the sensor ahead of any catalyst and above horizontal in the pipe, power the gauge from a switched supply, and run the sensor only with the gauge powered. Wideband controllers on their own are listed under Engine Management › Wideband Controllers, and data loggers under Gauges & Sensors › Data Loggers.