Air Filters · Universal Filters

K&N Filter Clamp-On Air Filters

K&N Filter Clamp-On Air Filters guide

K&N’s clamp-on filters are universal: each fits over an intake pipe or throttle body neck and is held by a hose clamp around a moulded rubber flange. K&N states that the flange can be stretched a little to fit an in-between size, and some chrome filters come with flange inserts that adapt one filter to more than one pipe size. The titles carry only the part number, so start from a known K&N number, or measure the pipe and check it against the flange size K&N gives for the part number.

Beyond size, the range divides by media and top. Most filters use K&N’s oiled cotton element, while DryFlow filters use an oil-free synthetic media that is washed with K&N’s synthetic cleaner instead of being re-oiled. X-Stream filters add a second element inside the top, for more filter area within the same outside dimensions, and other filters have a chrome or carbon fibre top, or a carbon fibre top and base, for an installation that is on show.

Wherever the filter sits, leave clear space around it so air can reach the whole element, and shield it from exhaust and turbo heat if it is in the engine bay. Clean it before it clogs, and re-oil a cotton filter sparingly after washing. K&N’s pre-filter wraps for these filters are listed under Air Filter Wraps.