Engine Management · Wiring Harnesses

Plug-and-Play Harnesses

Top brands in Plug-and-Play Harnesses

Plug-and-Play Harnesses guide

A plug-and-play harness connects an aftermarket ECU to the car’s own wiring. One end carries the plugs of the new ECU, the other end the plugs of the factory engine computer, so the original loom, sensors and actuators stay in place and nothing is cut. This page holds Haltech adapter harnesses for its Elite and Nexus ECUs, listed by car, and Hybrid Racing’s conversion harnesses for fitting a Honda K-series engine into older Civic and Integra models.

Because the factory loom stays, an installation is quicker and can be reversed: the original computer plugs back in if the car is sold or returned to standard. The adapter only changes the connections, so the sensors and coils the car already has must suit the new calibration, and some features need extra wiring for inputs the factory loom never had.

How to choose:

  • The ECU: each Haltech harness is made for one ECU family, often in versions for the Elite and the Nexus range for the same car. Use the Suits ECU filter on this page to see only the harnesses for your unit.
  • The car: the title names the model, chassis or engine code and often the model years or gearbox. Match all of them, as a different year can use a different factory plug.
  • Engine swaps: a conversion harness joins a newer engine and its ECU to an older chassis loom, so the dash, lights and starting circuits keep working.

Before fitting, disconnect the battery, unplug the factory ECU and check its plugs for corrosion or bent pins. Route the adapter where it cannot rub or be pinched behind trim, and secure the joins so their weight does not hang on the connectors. Load a base map that suits the car before the first start.