King Main Bearing Shell HONDA A-SERIES, B-SERIES, K-SERIES
€76.76 Incl. VAT
- Brand: King Bearings
- Category: Engine Bearings
- Max Thickness: 2.002 mm
- Fits: Honda 1.6L 16v – B16A
Does this part fit your car?
Check your carWays to pay
Also Bancontact (BE), Przelewy24 (PL), EPS (AT) and Multibanco (PT)
Honda
CIVIC del Sol Mk III (EH, EG) Targa 03/1992–12/1998
CIVIC MK IV (EC, ED, EE, EF) Hatchback 09/1987–10/1993
CIVIC MK V (EG, EH) Hatchback 10/1991–11/1995
CIVIC MK V (EG, EH) Sedan 10/1991–12/1996
CIVIC V (EG, EH) Sedan 10/1991–12/1996
CIVIC VI (EJ, EK) Hatchback 10/1995–03/2001
CIVIC VI (EJ, EK, SO) Sedan 06/1995–03/2001
CIVIC VI (EJ, EM1) Coupe 03/1996–12/2000
CRX Mk II (ED, EE) Coupe 10/1987–02/1992
INTEGRA (DC) Coupe 07/1993–11/2001

King Bearings
King Engine Bearings was founded in 1960 by Shmuel Zaslavsky in Kiryat Gat, Israel, where research, engineering and primary production still take place today. The XP race series is the headline programme, built on a tri-metal copper-lead structure with a nickel barrier and lead-tin-copper Babbitt overlay branded pMaxBlack, rated 24 percent harder than conventional tri-metal race bearings. The XPC variant adds a pMaxKote nano-composite polymer coating for additional wear resistance without changing wall thickness. Geometric features such as U-Groove, ElliptiX and RadiaLock are engineered for forged aftermarket cranks running sustained high loads, with coverage focused on Honda K, Nissan RB, Mitsubishi 4G63, GM LS and Ford EcoBoost platforms.
Talk to a real motorsport specialist.
EU-based, motorsport-experienced. We'll walk through your application before you buy.
Description
King Main Bearing Shell HONDA A-SERIES, B-SERIES, K-SERIES
Specifications
| Max Thickness | 2.002 mm |
|---|
Compatible vehicles
- Honda B16A
- Honda B17A
- Honda B18
- Honda B18A1
- Honda B18C1
- Honda B18C5
- Honda B20B
- Honda K20A
- Honda K24
Specifications
| Part number | MB5259XPC |
|---|---|
| Housing | 56.904 – 59.019 mm |
| Length | 19.90 mm |
| Shaft | 54.976 – 54.999 mm |
| Material | Main Bearing |

King Bearings
King Engine Bearings was founded in 1960 by Shmuel Zaslavsky in Kiryat Gat, Israel, where research, engineering and primary production still take place today. The XP race series is the headline programme, built on a tri-metal copper-lead structure with a nickel barrier and lead-tin-copper Babbitt overlay branded pMaxBlack, rated 24 percent harder than conventional tri-metal race bearings. The XPC variant adds a pMaxKote nano-composite polymer coating for additional wear resistance without changing wall thickness. Geometric features such as U-Groove, ElliptiX and RadiaLock are engineered for forged aftermarket cranks running sustained high loads, with coverage focused on Honda K, Nissan RB, Mitsubishi 4G63, GM LS and Ford EcoBoost platforms.
Talk to a real motorsport specialist.
EU-based, motorsport-experienced. We'll walk through your application before you buy.






Reviews
There are no reviews yet.