Turbo · Blow Off Valves

BOV Replacement Parts & Accessories

Top brands in BOV Replacement Parts & Accessories

BOV Replacement Parts & Accessories guide

Blow-off valves open on every lift-off and gear change, so their seals and solenoids wear like any other moving part. This category holds O-ring kits, pistons, diaphragms and solenoids for existing valves, plus the flanges, adapters, fittings and blanking parts used to install a valve or to remove one.

Most valves use a piston or a diaphragm, held shut by a spring and opened when manifold vacuum and charge pressure overcome it. A worn or dry piston O-ring, or a cracked diaphragm, can leak boost under load or make the valve stick, so it no longer vents cleanly on lift-off. Electronically managed valves add an ECU-controlled solenoid, which can fail electrically while the mechanical side is still sound.

Parts are listed by valve model:

  • Electronically managed valves: O-ring kits and solenoids listed by the valve’s model code. Some valves take more than one kit.
  • Pistons and diaphragms: piston and diaphragm assemblies, a sensor cap upgrade and O-ring kits for particular valves.
  • Mounting: weld flanges in aluminium, stainless steel and titanium for male or female valves, V-band flanges and clamps, hose adapters, and flange adapters and gaskets for putting a valve where another design sat.
  • Inlets and outlets: inlet fittings, plumb-back fittings that return air to the intake, port upgrade kits and replacement trumpets for venting to atmosphere.
  • Blanking: hose plugs, port plugs, a V-band blanking plate, block-off parts made for particular cars and turbos, and plugs that prevent a check-engine warning once a factory valve is removed.
  • Service items: nipples for the reference line, a BOV controller unit and a lubricant for valve pistons.

Identify the valve from the marking on its body before choosing parts. Clean a piston valve’s bore before fitting new O-rings, and use only lubricant made for it, because general grease collects dirt and makes the piston stick. Check the reference hose and its fittings at every service, since a leak there changes when the valve opens. Where a factory valve is removed, block its port fully, as even a small leak under boost costs pressure and upsets the engine’s air metering. Springs are listed under BOV Spring Kits.