ST XTA Coilover Audi Cupra VW ST18202808CT
€2,388.48 Incl. VAT
- Product Line: Street Performance
- Version: XTA plus 3
- Damping adjustment: Rebound and Compression Damping
- Material: Galvanized steel
- Adjustment FA/RA: Thread/Thread
- strut diameter front axle (mm): 55
- rear axle type: Multi-link rear axle (independent wheel suspension)
- Approval: Teilegutachten (§19.3)
- Content of delivery: Set FA coilover struts incl. top mounts, RA springs with height adjustment + dampers
Does this part fit your car?
Check your carAudi
A3 (GY) 8YS 03 / 2020 - Sedan
A3 Sportback (GY) 8YA 11 / 2019 - Hatchback
Cupra
LEON (KL1, KU1, KUG) 09 / 2020 - Hatchback
VW
GOLF VIII (CD1, DA1) 07 / 2019 - Hatchback
Show all 42 vehicles
VW
GOLF VIII (CD1, DA1) 07 / 2019 - Hatchback
- 1.0 TSI - 81 KW
- 1.4 TSI - 110 KW
- 1.5 eTSI - 85 KW
- 1.5 eTSI - 96 KW
- 1.5 eTSI - 110 KW
- 1.5 TSI - 85 KW
- 1.5 TSI - 96 KW
- 1.5 TSI - 110 KW
- 2.0 GTI - 180 KW
- 2.0 GTI - 195 KW
- 2.0 GTI Clubsport - 221 KW
- 2.0 TDI - 85 KW
- 2.0 TDI - 110 KW
- 2.0 TDI GTD - 147 KW
- 2.0 TSI - 140 KW
- 2.0 TSI R 4motion - 235 KW
- 2.0 TSI R 4motion - 245 KW
Ways to pay
- and more
ST
ST is a German suspension brand and part of the KW Automotive Group. Its range here covers coilovers, lowering springs, spring-and-damper kits, wheel spacers and the wheel bolts that go with them. The coilovers come in three lines: X, XA and XTA. The lowering springs are mostly the Street Comfort line, spring-and-damper kits are listed by engine, and the DZX system makes up a large share of the spacers.
The listings centre on Volkswagen, Audi, BMW, Seat and Skoda, and also cover Ford, Opel, Mercedes-Benz, Honda and Mini. The Audi A3, Volkswagen Golf and Seat Leon have the most listings.
What sets ST apart from the other spacer and suspension brands here is the hardware. ST supplies wheel bolts, locking bolts and nuts in M12 and M14 threads, with conical or ball seats and in several lengths. Fitting spacers usually means longer bolts, so ST lets you order both from the same maker.
Talk to a real motorsport specialist.
EU-based, motorsport-experienced. We'll walk through your application before you buy.
Description
ST XTA COILOVERS AUDI CUPRA VW
ST XTA plus 3 COILOVERS Audi Cupra VW
The XTA plus 3 coilover kit gives your car maximum performance for the road and the tools you need for any challenge.
From the factory, the XTA plus 3 coilover kit is equipped with KW dampers that are adjustable in high- and lowspeed compression as well as adjustable rebound damping. With 24 clicks of adjustment for each, high speed and low speed compression damping and 18 clicks of rebound adjustment, your suspension knows no limits. It doesn’t matter if you bolt in an aftermarket roll cage, weld in a cage, modification to PU bushings upgrade to spherical bushing or changed wheel loads – the XTA plus 3 coilover has what it takes to keep your car dialed! Of course, the XTA plus 3 also includes a parts approval certificate, race springs and aluminium unibal top mounts.
Easy lowering adjustment
Like all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA plus 3 coilovers due to the type of construction.
KW Engineering: Exclusive for ST suspension
The high-quality ST XTA plus 3 coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.
– Latest damping technology for maximum longevity
– Reduced system friction for effective damping adjustment
– Individual lowering within the tested adjustment range
– Front and rear axle (when possible) with thread adjustment
– Galvanized coilover struts with additional coating for an optimized corrosion protection
– Complete solution with adjustable spring plate, spring system and bumpers with dust protection
– Aluminium adjustable uniball top mounts (when possible)
– Scaled camber adjustment, when possible
– 3-way adjustable dampers:
16 clicks low speed rebound damping
24 clicks low speed compression damping
24 clicks high speed compression damping
Additional information
| Weight | 22.2 kg |
|---|---|
| Dimensions | 76 × 46 × 15 cm |
| Body Type | Sedan | Hatchback |
| Part Number | ST18202808CT |
ST
ST is a German suspension brand and part of the KW Automotive Group. Its range here covers coilovers, lowering springs, spring-and-damper kits, wheel spacers and the wheel bolts that go with them. The coilovers come in three lines: X, XA and XTA. The lowering springs are mostly the Street Comfort line, spring-and-damper kits are listed by engine, and the DZX system makes up a large share of the spacers.
The listings centre on Volkswagen, Audi, BMW, Seat and Skoda, and also cover Ford, Opel, Mercedes-Benz, Honda and Mini. The Audi A3, Volkswagen Golf and Seat Leon have the most listings.
What sets ST apart from the other spacer and suspension brands here is the hardware. ST supplies wheel bolts, locking bolts and nuts in M12 and M14 threads, with conical or ball seats and in several lengths. Fitting spacers usually means longer bolts, so ST lets you order both from the same maker.
Talk to a real motorsport specialist.
EU-based, motorsport-experienced. We'll walk through your application before you buy.
Related products
Recently Viewed Products
Store Information
TrackTool Factory
Sluispolderweg 7A
1505 HJ Zaandam
The Netherlands
KvK 97296902
BTW NL867990375B01