ST XA Coilover Subaru 18245004
€1,129.69 Incl. VAT
- Product Line: Street Performance
- Version: XA
- Damping adjustment: Rebound damping
- Material: Galvanized steel
- Adjustment FA/RA: Thread/Thread
- Approval: Teilegutachten (§19.3)
- Content of delivery: Set FA + RA coilover struts
Does this part fit your car?
Check your carSubaru
IMPREZA GD (GD / GG, GD / GGS) 09 / 1999 - 06 / 2009 Sedan
- 1.5 AWD (GD3) - 74 KW
- 1.5 AWD (GD3) - 77 KW
- 1.5 AWD (GDD) - 81 KW
- 1.6 AWD (GD5) - 70 KW
- 2.0 AWD (GDA) - 184 KW
- 2.0 i AWD (GD9) - 92 KW
- 2.0 i AWD (GDA) - 150 KW
- 2.0 i R AWD (GD9) - 118 KW
- 2.0 i WRX AWD (GDA) - 168 KW
- 2.0 WRX Turbo AWD (GDA) - 160 KW
- 2.0 WRX Turbo AWD (GDA) - 165 KW
- 2.5 AWD (GDE) - 130 KW
- 2.5 AWD (GDF) - 221 KW
- 2.5 AWD - 123 KW
- 2.5 i AWD (GDE) - 112 KW
- 2.5 i WRX AWD (GDG) - 169 KW
IMPREZA Station GG (G3, GD / GG, GD / GGS) 10 / 2000 - 12 / 2008 Touring
Show all 29 vehicles
Subaru
IMPREZA Station GG (G3, GD / GG, GD / GGS) 10 / 2000 - 12 / 2008 Touring
Ways to pay
- and more
ST
ST is a German suspension brand and part of the KW Automotive Group. Its range here covers coilovers, lowering springs, spring-and-damper kits, wheel spacers and the wheel bolts that go with them. The coilovers come in three lines: X, XA and XTA. The lowering springs are mostly the Street Comfort line, spring-and-damper kits are listed by engine, and the DZX system makes up a large share of the spacers.
The listings centre on Volkswagen, Audi, BMW, Seat and Skoda, and also cover Ford, Opel, Mercedes-Benz, Honda and Mini. The Audi A3, Volkswagen Golf and Seat Leon have the most listings.
What sets ST apart from the other spacer and suspension brands here is the hardware. ST supplies wheel bolts, locking bolts and nuts in M12 and M14 threads, with conical or ball seats and in several lengths. Fitting spacers usually means longer bolts, so ST lets you order both from the same maker.
Talk to a real motorsport specialist.
EU-based, motorsport-experienced. We'll walk through your application before you buy.
Description
ST XA COILOVERS SUBARU
ST XA COILOVERS Subaru
For drivers wanting more than just ride height adjustment comes the ST XA coilover. Developed alongside KW Automotive the ST XA allows individual adjustment of the damping to suit just about all your driving needs!
Perfect for sporty driving
ST XA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. Any vehicle fitted with ST XA coilovers will act much more agile and sporty compared to standard.
Easy lowering adjustment
Like all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XA coilovers due to the type of construction. For example, older vehicles such as the Honda Civic (EJ9) can be lowered between 40-75mm with ST XA coilovers, while newer models such as the Audi S3 (8P) can be lowered between 10-40mm due to being much lower from the factory.
KW Engineering: Exclusive for ST suspension
The high-quality ST XA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.
– External damper adjustment
– Latest damping technology for maximum longevity
– Reduced system friction for effective damping adjustment
– Individual lowering within the tested adjustment range
– Front and rear axle (when possible) with thread adjustment
– Galvanized coilover struts with additional coating for an optimized corrosion protection
– Complete solution with adjustable spring plate, spring system and bumpers with dust protection
Additional information
| Weight | 23.7 kg |
|---|---|
| Dimensions | 76 × 46 × 15 cm |
| Body Type | Sedan | Touring |
| Part Number | 18245004 |
ST
ST is a German suspension brand and part of the KW Automotive Group. Its range here covers coilovers, lowering springs, spring-and-damper kits, wheel spacers and the wheel bolts that go with them. The coilovers come in three lines: X, XA and XTA. The lowering springs are mostly the Street Comfort line, spring-and-damper kits are listed by engine, and the DZX system makes up a large share of the spacers.
The listings centre on Volkswagen, Audi, BMW, Seat and Skoda, and also cover Ford, Opel, Mercedes-Benz, Honda and Mini. The Audi A3, Volkswagen Golf and Seat Leon have the most listings.
What sets ST apart from the other spacer and suspension brands here is the hardware. ST supplies wheel bolts, locking bolts and nuts in M12 and M14 threads, with conical or ball seats and in several lengths. Fitting spacers usually means longer bolts, so ST lets you order both from the same maker.
Talk to a real motorsport specialist.
EU-based, motorsport-experienced. We'll walk through your application before you buy.
Related products
Store Information
TrackTool Factory
Sluispolderweg 7A
1505 HJ Zaandam
The Netherlands
KvK 97296902
BTW NL867990375B01