BMW 3series E30 83-94 power steering Ultra-R 4P Front Brace
€155.00 Incl. VAT
- Ultra Racing Upper Braces
- Car Brand: BMW
Does this part fit your car?
Check your car
BMW
3 (E30) 3 / 1, 3 / A, M3 09 / 1982 - 03 / 1992 Sedan
Show all 47 vehicles
BMW
3 (E30) 3 / 1, 3 / A, M3 09 / 1982 - 03 / 1992 Sedan
- 318 i - 77 KW
- 318 i - 83 KW
- 318 i - 85 KW
- 318 is - 100 KW
- 320 i - 92 KW
- 320 i - 93 KW
- 320 i - 95 KW
- 320 is - 141 KW
- 323 i - 102 KW
- 323 i - 110 KW
- 324 d - 63 KW
- 324 td - 85 KW
- 325 e 2.7 - 90 KW
- 325 e 2.7 - 95 KW
- 325 i - 125 KW
- 325 i - 126 KW
- 325 i - 141 KW
- M3 2.3 - 143 KW
- M3 2.3 - 147 KW
- M3 2.3 - 158 KW
- M3 EVO I 2.3 - 162 KW
- M3 EVO II 2.5 - 175 KW
3 (E30) 3 / 1, 3 / A 07 / 1987 - 10 / 1994 Touring
3 (E30) 3 / R 09 / 1982 - 11 / 1993 Convertible
Ultra Racing
Ultra Racing is a Malaysian maker of bolt-on chassis bracing. Its range here covers front and rear upper strut bars, lower braces and tie bars, mid and member braces, side and floor bars, fender brackets and front and rear anti-roll bars. Braces are described by their number of mounting points, from two-point bars to eight-point lower frames, and anti-roll bars by diameter.
Japanese and European cars both feature strongly. Honda leads the list, ahead of BMW, Toyota, Nissan, Mazda and Mercedes-Benz, with Volkswagen, Mitsubishi, Subaru, Ford and Audi also covered. Plenty of parts are listed for the Honda Civic (EK), Toyota Corolla (E12) and BMW 3 Series (E46).
Other brands in the Chassis section mostly offer anti-roll bar kits or a handful of braces. Ultra Racing is the range to look at if you want to brace several areas of the same car. Its listings let you build up strut, lower and mid bracing from one maker.
Talk to a real motorsport specialist.
EU-based, motorsport-experienced. We'll walk through your application before you buy.
Description
Ultra Racing front lower bar (front member brace), part number UR-LA4-1082: a bolt-on 4-point brace for the front lower chassis of the BMW E30 320i listed below. Ultra Racing describes its lower bars as spreading cornering loads across both sides of the chassis.
- Type: front lower bar / front member brace
- Mounting points: 4
- Installation: bolt-on
- Dimensions: 85 cm × 40 cm × 6 cm
- Weight: 1.8 kg
- Material: steel; Ultra Racing uses 4–5 mm steel plate for brackets and 1.2–1.6 mm hollow and oval steel tubes
Vehicle listed by Ultra Racing: BMW E30 (320i) 2.0 2WD.
Specifications
| Part Number | UR-LA4-1082 |
|---|---|
| Car Brand | BMW |
| Manufacturer | Ultra Racing |
Ultra Racing
Ultra Racing is a Malaysian maker of bolt-on chassis bracing. Its range here covers front and rear upper strut bars, lower braces and tie bars, mid and member braces, side and floor bars, fender brackets and front and rear anti-roll bars. Braces are described by their number of mounting points, from two-point bars to eight-point lower frames, and anti-roll bars by diameter.
Japanese and European cars both feature strongly. Honda leads the list, ahead of BMW, Toyota, Nissan, Mazda and Mercedes-Benz, with Volkswagen, Mitsubishi, Subaru, Ford and Audi also covered. Plenty of parts are listed for the Honda Civic (EK), Toyota Corolla (E12) and BMW 3 Series (E46).
Other brands in the Chassis section mostly offer anti-roll bar kits or a handful of braces. Ultra Racing is the range to look at if you want to brace several areas of the same car. Its listings let you build up strut, lower and mid bracing from one maker.
Talk to a real motorsport specialist.
EU-based, motorsport-experienced. We'll walk through your application before you buy.
Related products
Store Information
TrackTool Factory
Sluispolderweg 7A
1505 HJ Zaandam
The Netherlands
Chamber of Commerce (KVK): 97296902
VAT: NL867990375B01
Reviews
There are no reviews yet.