K&N Universal Air Intake System – 54-5000
€239.99 Incl. VAT
Delivered in 10 days
- K&N Filter Cold Air Intakes
Universal part: not made for one specific car. Check the sizes in the description.
Ways to pay
- and more
K&N Filter
K&N was founded in 1969 in Riverside, California, by Ken Johnson and Norm McDonald, the K and the N of the name. Its filters use washable, reusable oiled cotton gauze, cleaned and re-oiled with a service kit rather than thrown away, and the range here is built on them.
It covers replacement panel filters, complete Performance Air Intake Systems, universal clamp-on, round and conical filters, cabin air filters, crankcase breather filters, carburettor filters and fuel filters. The cleaning and oiling kits, foam wraps, top plates and clips that go with them are listed too.
K&N parts are listed by part number and filter type rather than by car. If you are replacing a K&N filter, its part number is the quickest route; for a universal filter, work from the neck diameter and the space available.
Among the intake brands on TrackToolFactory, K&N has the broadest mix of filter types, from engine and cabin air to breathers, carburettors and fuel. If you prefer a filter that is washed without oil, another panel filter range here uses dry synthetic media.
Talk to a real motorsport specialist.
EU-based, motorsport-experienced. We'll walk through your application before you buy.
Description
K&N's 54 Series shielded air intake system is a universal cold air intake system. The 54 Series assembly is designed to increase volumetric efficiency and engine horsepower. The intake incorporates a K&N famous cotton gauze air filter which is removable for periodic cleaning and provides the benefit of an open cone filter and standard air box in one unit. The plastic injection-molded housing acts as a heat shield to prevent any power loss. Assembly designs were flow tested for many hours before our engineers completed the shape to provide high flow with low restriction and great filtration all in a small space. Included in the box is a template to cut your own vinyl wrap for personal customization of the housing. The assembly comes with a 76mm air filter base flange and a 100mm housing intake diameter. The filter base incorporates a 1/4 inch NPT threaded fitting to attach an optional vent adapter.
Delivered in 10 days
K&N Filter
K&N was founded in 1969 in Riverside, California, by Ken Johnson and Norm McDonald, the K and the N of the name. Its filters use washable, reusable oiled cotton gauze, cleaned and re-oiled with a service kit rather than thrown away, and the range here is built on them.
It covers replacement panel filters, complete Performance Air Intake Systems, universal clamp-on, round and conical filters, cabin air filters, crankcase breather filters, carburettor filters and fuel filters. The cleaning and oiling kits, foam wraps, top plates and clips that go with them are listed too.
K&N parts are listed by part number and filter type rather than by car. If you are replacing a K&N filter, its part number is the quickest route; for a universal filter, work from the neck diameter and the space available.
Among the intake brands on TrackToolFactory, K&N has the broadest mix of filter types, from engine and cabin air to breathers, carburettors and fuel. If you prefer a filter that is washed without oil, another panel filter range here uses dry synthetic media.
Talk to a real motorsport specialist.
EU-based, motorsport-experienced. We'll walk through your application before you buy.
Related products
US-Racing Cold Air Intake Polished (Civic 95-01 1.4/1.6)
Recently Viewed Products
Store Information
TrackTool Factory
Sluispolderweg 7A
1505 HJ Zaandam
The Netherlands
KvK 97296902
BTW NL867990375B01
Reviews
There are no reviews yet.