K&N Performance Air Intake System – 69-7081-1TS
Infiniti
- G35 · 3.5L V6 Gas2003–2006
€514.99 Incl. VAT
Delivered in 10 days
- K&N Filter Cold Air Intakes
- Vehicle Fitment: Infiniti G35, Street Legal in All US States: Yes
Ways to pay
- and more
K&N Filter
K&N was founded in 1969 in Riverside, California, by Ken Johnson and Norm McDonald, the K and the N of the name. Its filters use washable, reusable oiled cotton gauze, cleaned and re-oiled with a service kit rather than thrown away, and the range here is built on them.
It covers replacement panel filters, complete Performance Air Intake Systems, universal clamp-on, round and conical filters, cabin air filters, crankcase breather filters, carburettor filters and fuel filters. The cleaning and oiling kits, foam wraps, top plates and clips that go with them are listed too.
K&N parts are listed by part number and filter type rather than by car. If you are replacing a K&N filter, its part number is the quickest route; for a universal filter, work from the neck diameter and the space available.
Among the intake brands on TrackToolFactory, K&N has the broadest mix of filter types, from engine and cabin air to breathers, carburettors and fuel. If you prefer a filter that is washed without oil, another panel filter range here uses dry synthetic media.
Talk to a real motorsport specialist.
EU-based, motorsport-experienced. We'll walk through your application before you buy.
Description
The K&N 69-7081-1TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Infiniti G35 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory mass air sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, pliers, ratchet set and an Allen wrench. ach vehicle and air intake.
Delivered in 10 days
K&N Filter
K&N was founded in 1969 in Riverside, California, by Ken Johnson and Norm McDonald, the K and the N of the name. Its filters use washable, reusable oiled cotton gauze, cleaned and re-oiled with a service kit rather than thrown away, and the range here is built on them.
It covers replacement panel filters, complete Performance Air Intake Systems, universal clamp-on, round and conical filters, cabin air filters, crankcase breather filters, carburettor filters and fuel filters. The cleaning and oiling kits, foam wraps, top plates and clips that go with them are listed too.
K&N parts are listed by part number and filter type rather than by car. If you are replacing a K&N filter, its part number is the quickest route; for a universal filter, work from the neck diameter and the space available.
Among the intake brands on TrackToolFactory, K&N has the broadest mix of filter types, from engine and cabin air to breathers, carburettors and fuel. If you prefer a filter that is washed without oil, another panel filter range here uses dry synthetic media.
Talk to a real motorsport specialist.
EU-based, motorsport-experienced. We'll walk through your application before you buy.
Related products
US-Racing Cold Air Intake Polished (Prelude/Accord 92-02)
Store Information
TrackTool Factory
Sluispolderweg 7A
1505 HJ Zaandam
The Netherlands
KvK 97296902
BTW NL867990375B01
Reviews
There are no reviews yet.