K&N Performance Air Intake System – 69-1207TP
Honda
- Accord · 3.0L V6 Gas2003–2007
€590.00 Incl. VAT
Delivered in 10 days
- K&N Filter Cold Air Intakes
- Vehicle Fitment: Honda Accord, Street Legal in All US States: Yes
Ways to pay
- and more
K&N Filter
K&N was founded in 1969 in Riverside, California, by Ken Johnson and Norm McDonald, the K and the N of the name. Its filters use washable, reusable oiled cotton gauze, cleaned and re-oiled with a service kit rather than thrown away, and the range here is built on them.
It covers replacement panel filters, complete Performance Air Intake Systems, universal clamp-on, round and conical filters, cabin air filters, crankcase breather filters, carburettor filters and fuel filters. The cleaning and oiling kits, foam wraps, top plates and clips that go with them are listed too.
K&N parts are listed by part number and filter type rather than by car. If you are replacing a K&N filter, its part number is the quickest route; for a universal filter, work from the neck diameter and the space available.
Among the intake brands on TrackToolFactory, K&N has the broadest mix of filter types, from engine and cabin air to breathers, carburettors and fuel. If you prefer a filter that is washed without oil, another panel filter range here uses dry synthetic media.
Talk to a real motorsport specialist.
EU-based, motorsport-experienced. We'll walk through your application before you buy.
Description
The K&N 69-1207TP Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda Accord 3.0L V6 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-1207TP cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. ach vehicle and air intake.
Delivered in 10 days
K&N Filter
K&N was founded in 1969 in Riverside, California, by Ken Johnson and Norm McDonald, the K and the N of the name. Its filters use washable, reusable oiled cotton gauze, cleaned and re-oiled with a service kit rather than thrown away, and the range here is built on them.
It covers replacement panel filters, complete Performance Air Intake Systems, universal clamp-on, round and conical filters, cabin air filters, crankcase breather filters, carburettor filters and fuel filters. The cleaning and oiling kits, foam wraps, top plates and clips that go with them are listed too.
K&N parts are listed by part number and filter type rather than by car. If you are replacing a K&N filter, its part number is the quickest route; for a universal filter, work from the neck diameter and the space available.
Among the intake brands on TrackToolFactory, K&N has the broadest mix of filter types, from engine and cabin air to breathers, carburettors and fuel. If you prefer a filter that is washed without oil, another panel filter range here uses dry synthetic media.
Talk to a real motorsport specialist.
EU-based, motorsport-experienced. We'll walk through your application before you buy.
Related products
US-Racing Cold Air Intake Polished (Prelude/Accord 92-02)
US-Racing Cold Air Intake Black (Prelude/Accord 92-02)
Recently Viewed Products
Store Information
TrackTool Factory
Sluispolderweg 7A
1505 HJ Zaandam
The Netherlands
KvK 97296902
BTW NL867990375B01
Reviews
There are no reviews yet.