K&N Performance Air Intake System – 57-3092
Chevrolet
- Camaro SS · 6.2L V8 Gas2016–2020
€364.98 Incl. VAT
Delivered in 10 days
- K&N Filter Cold Air Intakes
- Vehicle Fitment: Chevrolet Camaro SS, Street Legal in All US States: Yes
Ways to pay
- and more
K&N Filter
K&N was founded in 1969 in Riverside, California, by Ken Johnson and Norm McDonald, the K and the N of the name. Its filters use washable, reusable oiled cotton gauze, cleaned and re-oiled with a service kit rather than thrown away, and the range here is built on them.
It covers replacement panel filters, complete Performance Air Intake Systems, universal clamp-on, round and conical filters, cabin air filters, crankcase breather filters, carburettor filters and fuel filters. The cleaning and oiling kits, foam wraps, top plates and clips that go with them are listed too.
K&N parts are listed by part number and filter type rather than by car. If you are replacing a K&N filter, its part number is the quickest route; for a universal filter, work from the neck diameter and the space available.
Among the intake brands on TrackToolFactory, K&N has the broadest mix of filter types, from engine and cabin air to breathers, carburettors and fuel. If you prefer a filter that is washed without oil, another panel filter range here uses dry synthetic media.
Talk to a real motorsport specialist.
EU-based, motorsport-experienced. We'll walk through your application before you buy.
Description
The K&N 57-3092 FIPK air intake system replaces the restrictive factory air filter and air intake housing on specific Chevrolet Camaro SS models. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine's throttle body for a guaranteed power gain. The tube accommodates the factory mass air sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle's existing factory mounting points.
Delivered in 10 days
K&N Filter
K&N was founded in 1969 in Riverside, California, by Ken Johnson and Norm McDonald, the K and the N of the name. Its filters use washable, reusable oiled cotton gauze, cleaned and re-oiled with a service kit rather than thrown away, and the range here is built on them.
It covers replacement panel filters, complete Performance Air Intake Systems, universal clamp-on, round and conical filters, cabin air filters, crankcase breather filters, carburettor filters and fuel filters. The cleaning and oiling kits, foam wraps, top plates and clips that go with them are listed too.
K&N parts are listed by part number and filter type rather than by car. If you are replacing a K&N filter, its part number is the quickest route; for a universal filter, work from the neck diameter and the space available.
Among the intake brands on TrackToolFactory, K&N has the broadest mix of filter types, from engine and cabin air to breathers, carburettors and fuel. If you prefer a filter that is washed without oil, another panel filter range here uses dry synthetic media.
Talk to a real motorsport specialist.
EU-based, motorsport-experienced. We'll walk through your application before you buy.
Related products
US-Racing Cold Air Intake Black (Civic 95-01 1.5/1.6 VTEC)
US-Racing Cold Air Intake Black (Prelude/Accord 92-02)
Recently Viewed Products
Store Information
TrackTool Factory
Sluispolderweg 7A
1505 HJ Zaandam
The Netherlands
KvK 97296902
BTW NL867990375B01
Reviews
There are no reviews yet.