Bilstein B4 Rear shock absorber VW POLO 6N2
€71.87 Incl. VAT
- Range: B4 OE Replacement
- Type: Shock Absorber
- Position: Rear
- Adjustability: Non-adjustable
- Fits: VW Polo 3 (6N1) 1994–1999
- Part no: 19-128863
Does this part fit your car?
Check your carVW
POLO III (6N1, 6N) 10 / 1994 - 10 / 1999 Hatchback
POLO III (6N2, 6N) 10 / 1999 - 10 / 2001 Hatchback
Ways to pay
- and more
Bilstein
Bilstein's range here is suspension from standard replacement upwards, organised by the maker's B numbers. B4 OE Replacement dampers are the largest group, B6 Performance and B8 Performance Plus are the sportier dampers, and B3 OE Replacement springs cover the spring side at original height. B12 Pro-Kit and Sportline kits pair dampers with lowering springs. The coilovers run through B14 PSS, B16 PSS9 and PSS10 and the EVO S, SE, T1, T2 and R lines, some adjustable for height and damping. DampMatic self-adjusting dampers, DampTronic electronic versions and steering dampers complete the range.
The range is listed for a wide spread of cars, led by BMW, Audi and Mercedes-Benz, followed by Ford, Volkswagen, Opel, Citroën and Renault. The BMW 3 Series (E36, E46 and E90), Audi A3 and Mercedes-Benz C-Class (W205) are among the models with the most listings.
Elsewhere in the Shock Absorbers section you will find rebound-adjustable dampers. Bilstein's dampers are mostly non-adjustable gas-pressure units, so the choice is made by picking the line, from OE replacement to performance, rather than by turning an adjuster.
Talk to a real motorsport specialist.
EU-based, motorsport-experienced. We'll walk through your application before you buy.
Description
Bilstein B4 OE Replacement shock absorber for the VW Polo 3 (6N1) 1994–1999, Rear axle.
Bilstein's OE-replacement damper, valved to match the vehicle manufacturer's original ride and handling characteristics. A direct fit-and-drive replacement for worn factory dampers on standard-height suspension, restoring the car to how it was set up to feel.
Position: Rear · Adjustability: Non-adjustable · Part number: 19-128863
Also fits: VW Polo 3 (6N2) 1999–2001
Specifications
| Part number | 19-128863 |
|---|---|
| EAN | 4025258598624 |
| Range | B4 OE Replacement |
| Adjustability | Non-adjustable |
| Position | Rear |
| Damper Type | Gas Pressure |
Bilstein
Bilstein's range here is suspension from standard replacement upwards, organised by the maker's B numbers. B4 OE Replacement dampers are the largest group, B6 Performance and B8 Performance Plus are the sportier dampers, and B3 OE Replacement springs cover the spring side at original height. B12 Pro-Kit and Sportline kits pair dampers with lowering springs. The coilovers run through B14 PSS, B16 PSS9 and PSS10 and the EVO S, SE, T1, T2 and R lines, some adjustable for height and damping. DampMatic self-adjusting dampers, DampTronic electronic versions and steering dampers complete the range.
The range is listed for a wide spread of cars, led by BMW, Audi and Mercedes-Benz, followed by Ford, Volkswagen, Opel, Citroën and Renault. The BMW 3 Series (E36, E46 and E90), Audi A3 and Mercedes-Benz C-Class (W205) are among the models with the most listings.
Elsewhere in the Shock Absorbers section you will find rebound-adjustable dampers. Bilstein's dampers are mostly non-adjustable gas-pressure units, so the choice is made by picking the line, from OE replacement to performance, rather than by turning an adjuster.
Talk to a real motorsport specialist.
EU-based, motorsport-experienced. We'll walk through your application before you buy.
Related products
Recently Viewed Products
Store Information
TrackTool Factory
Sluispolderweg 7A
1505 HJ Zaandam
The Netherlands
Chamber of Commerce (KVK): 97296902
VAT: NL867990375B01
Reviews
There are no reviews yet.