Heavy-Duty Honda Transmission Detent Springs (07-13 Fit & 10-16 CR-Z)

Description

• More than 30% stiffer spring rate than stock.
• Stronger springs offer direct gear engagement
• Yellow Zinc Chromate plated for durability
• Suitable for all cars (street and race)

Our heavy-duty transmission detent springs offer an increase in the preload and 30% stiffer spring rate over the factory parts which aids the transmission gear selector fork. Upgrading these springs will make your gear engagements a bit sharper since they replace the soft OEM ones.

Our Heavy-Duty Gear Selector Springs offer an upgrade in the side-side movement of the shifter, these detent springs offer a forward-back upgrade. An immediate change in feel will be noticed once installed. Replace the worn-out detent springs and add new life to your gear changes.

Depending on the application, these springs are more than 30% stiffer than the stock Honda hardware. Please use the installation instructions as a general guide for the Honda L-Series transmission.

Be sure to torque the Honda K-Series transmission detent bolts to 16 lbf-ft (22 N-m / 2.2 kgf-m). You will use all three springs. NOTE – Only the CRZ and Honda Fit RS 6spd will use all three springs. The Honda Fit / Jazz 5spd uses 2 springs. 

Three heavy-duty transmission detent springsView Install Guide HERE